|
|
Post by alexandgruntz on Mar 21, 2006 11:54:42 GMT -8
I have a level  . The thing that botherz me is that each time I scroll (with the bar or the wheel on the mouse) the tile selector movez over. I can only return it when I save and restart the GLE.  would be very much appreciated. |
|
|
|
Post by FriedGruntzaholic on Mar 21, 2006 13:52:36 GMT -8
It may be a case of not having the right window active. Remember that you are usually going to have a couple of windows open at the same time, especially if you are working in tile mode. One window will be active and you can move and navigate around in that window; the other(s) will be inactive and you won't be able to move or navigate in that window until you make it the active window by clicking in that window first.
|
|
|
|
Post by alexandgruntz on Mar 21, 2006 21:37:16 GMT -8
Remember that you are usually going to have a couple of windows open at the same time, especially if you are working in tile mode. Thanks, but are you talking about the main window or side windows?  |
|
GooRoo
Administrator
Owner Administrator
I luv Gruntz!
Posts: 7,425 
Display Name: GooRoo
|
Post by GooRoo on Mar 22, 2006 12:31:24 GMT -8
The Gruntz Level Editor openz either one or two windowz: - The main window ... the map of the puzzle (alwayz!)
- The Tilez window ... showing the available building blockz ... if you elect it.
The mouse will operate in whichever window is active (the last one you have clicked) ... not (necessarily) the window the mouse is over. So if the Tile window was the last one you clicked something in, the scroll button on a three button mouse will scroll the Tile window, even if the mouse cursor is over the main window (and vice-versa). |
|
|
|
Post by alexandgruntz on Mar 23, 2006 23:13:03 GMT -8
Things are really going wrong with my level. I just finished my CL  but when I go to load it, it quits, saying "Unable to set the game state".  #  # # # # # |
|
GooRoo
Administrator
Owner Administrator
I luv Gruntz!
Posts: 7,425
Display Name: GooRoo
|
Post by GooRoo on Mar 24, 2006 9:14:16 GMT -8
Things are really going wrong with my level. I just finished my CL but when I go to load it, it quits, saying "Unable to set the game state". # # # # # # That is usually a matter of a Switch logic missing, or on a Tile that is not a Switch; too many Gruntz on one 'team'; one or more Brickz without Brickz logicz ... or Brickz logic on a Tile that is not a Brick. If these possibilities do not help you correct the problem, send it to me as an attachment in an e-mail, and I will see what I can do to fix the problem(s). I would describe what I found in the return e-mail to you with the modified version of the Custom Level. (Sunday is my next 'free' day ... if it is raining in my area; not so free if the weather is dry (lawn mowing, etc.), so it may take a while to reply.) |
|
|
|
Post by alexandgruntz on Mar 24, 2006 12:42:05 GMT -8
If these possibilities do not help you correct the problem, send it to me as an attachment in an e-mail, and I will see what I can do to fix the problem(s). I've just sent the email out  |
|
...Ha! Ha! Scared ya', didn't I?
but when I go to load it, it quits, saying "Unable to set the game state". 
#
# #